Some good causes you may want a heating and air repair repair.

Unusual causes you may need heating system service Allen TX

Among the most extreme emotions and thoughts in the world is having to contact a furnace consultant within the dead of the winter time on account of your heating is not starting up. There are a number of reasons why your heater may not work, and there are some things you should check before you call a heater repair technician.

Filtering system

If your furnace turns on but does not seem to be blowing air, you could have a filter that is full of dirt. It is best to replace your filter right after every season. If you check your filter and find that it is dirty, change it right away.

Ignition sensor

A problem with your ignition sensor is yet another cause your furnace may not do the job. These units are constantly open to fire which enables it to get burnt around the ends. If that happens, your furnace may not turn on or may not stay on. It is possible to take off the sensor and use a wire pad or little bit of sandpaper to take off the soot. However, the sensor is probably bad and will need to be replaced by a professional if that doesn’t fix the problem.

Circuit breaker

The circuit breaker could be tripped if your thermostat appears to be working OK but your furnace is not turning on at all. This is an easy fix, as all you have to do is check the circuit for your furnace in your circuit box and reset it if necessary.

Pilot light

There is a pilot light that ignites your gas burner to provide the heat for the unit if you have a gas furnace. This light might be out, and whenever it does, your central heater will not blow heated air. If necessary, you can easily check the pilot light and relight it. You should call in a heater repair technician if you smell a strong odor of natural gas.

Thermostat

A regular cause for a furnace to not perform is a problem with the thermostat. If your heater isn’t turning on, check to make sure your thermostat is set to “heat” rather than “cool.” If you have a programmable thermostat, check to make sure that there isn’t a time and date setting programmed in that is preventing the heater from coming on. The good news is that if the problem is with your thermostat, it is an easy and relatively cheap fix.

Checking these typical difficulties could help you diagnose your furnace difficulties and steer clear of having to pay for heating and air Allen TX